Effects of crosslinking on physical properties of phenol–formaldehyde novolac cured epoxy resins

Abstract

AbstractTo clarify the relationship between crosslinking density and physical properties of phenol–formaldehyde novolac cured epxy resin and factors governing their physical properties, we studied various properties of cured resins having different crosslinking densities. The resins were prepared with various curing accelerators and raw epoxy resins having different molecular weights. We found that as the crosslinking density of a cured resin increases, glass transition temperature (Tg) rises and the relaxation time becomes longer. Furthermore, in the rubbery region, the coefficient of linear thermal expansion drops and the elastic modulus become larger, while, in the glassy region, the coefficient of linear thermal expansion, specific volume, water absorption, diffusion coefficient, and permeability all increase but the elastic modulus becomes smaller. The WLF analysis on the relaxation behaviors of typical cured resin showed that cured resin with a higher crosslinking density decreases in the fractional free volume. This behavior is completely opposite from the relationship predicted from the temperature dependency of specific volume. While the coefficient of thermal expansion of free volume decreases as the crosslinking density increases for the cured resin, it coincides well with the tendency predicted from the difference in coefficient of cubic thermal expansion in the rubbery and glassy regions of each cured resin. That the free volume obtained from WLF analysis shows a relationship opposite to the predicted free volume as based on the temperature dependency of specific volume is explained as follows: Namely, the free volume obtained from the WLF analysis is a hole free volumeVhwhich contributes to fluidity andVhdecreases with the crosslinking density. On the other hand, the free volume predicted from the specific volume is a sum of the interstitial free volumeViandVh.Viincreases with the crosslinking density and thisViincrease exceeds the decrease ofVh. Therefore, the free volume predicted from the specific volume increases with the crosslinking density. Consequently, the influence of free volume on the relationship between the crosslinking density and physical properties of cured resin can be interpreted as follows. As the crosslinking density increases on cured resins,Tgrises, the relaxation time is lengthened, and the coefficient of linear thermal expansion becomes smaller in the rubbery region because, as the crosslinking density increases,Vhdecreases. Since crosslinking density increases on cured resins, the coefficient of linear thermal expansion, water absorption, diffusion coefficient, and permeability become larger, and the elastic modulus becomes smaller in the glassy region because, as the crosslinking density increases,Viincreases and, accordingly, molecular chain packing becomes looser; i.e., the specific volume increases. © 1993 John Wiley & Sons, Inc.