Effects of core-yarn overfeed on texturing performance: comparison between air-jet and steam-jet texturing

Abstract

The objectives of this research work were to investigate the use of high-pressure steam in order to replace air in the production of spun-like textured yarns and to investigate the optimum level of core-yarn overfeed ratio for steam-jet textured yarn for the application of sewing threads. An existing air-jet texturing machine was modified to supply either air or steam to the texturing nozzle. Using an identical nozzle, both air-jet and steam-jet textured yarns were manufactured. Loop instability and loop density increased and strength and tenacity decreased when the core-yarn overfeed was increased in both air-jet and steam-jet textured yarns. Steam-jet textured yarns have lower loop instability, lower loop density and higher tensile properties than that of the air-jet textured yarns. Sewability results show that for both air-jet and steam-jet textured sewing threads, core-yarn overfeed ratios of 5.5 and 8.3% give better sewability.