Abstract
An appropriate construction sequence for crossing tunnels can help minimize the adverse impact on the tunnel that is constructed first (considered as the existing tunnel). However, the influence of construction sequence on crossing-tunnel interaction is complex. Two pairs of three-dimensional centrifuge tests were carried out to investigate the effects of construction sequence on crossing-tunnel interaction. In the first pair of tests, the new tunnel was excavated beneath the existing tunnel in a reference test, while in the other test the new tunnel advanced above the existing tunnel. To study the effects of cover depth on the construction sequence, the depths of the existing and new tunnels were increased in the second pair of tests. An advanced hypoplasticity constitutive model with small-strain stiffness was adopted to back-analyze the tests. The existing tunnel was found to be vertically compressed when the new tunnel was excavated underneath, but vertically elongated when the new tunnel advanced above. This is because the reduction of stress acting on the existing tunnel in the horizontal direction was larger than in the vertical direction when the new tunnel was constructed beneath. On the other hand, the decrease in vertical stress on the existing tunnel was larger than the horizontal stress reduction when the new tunnel was excavated above. This behavior was observed in both pairs of tests, irrespective of the cover depths of the tunnels. As the cover depths of the existing and new tunnels increased, settlement of the existing tunnel due to the new tunnel construction beneath decreased. This is because with the larger cover depths of the tunnels, the increase in mobilized shear stiffness of the soil dominated the increase in stress relief caused by the tunnel excavation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.