Abstract
Niobium-containing tellurite glass with starting composition of (90 − x)TeO 2–10Nb 2O 5–( x)ZnO ( x = 0–15 mol%) have been prepared by melt-quenching method and the effect of reduction of TeO 2 with simultaneous increase in ZnO on elastic properties was studied. Ultrasonic longitudinal and shear velocity showed initial decrease of 3.52% and 2.37%, respectively, at x = 5 mol%. For x > 5 mol%, longitudinal velocity showed weak recovery but shear velocity showed steady recovery with ZnO and recorded 0.95% increase in value at x = 15 mol% compared to x = 0 sample. Shear and Young's moduli recorded similar drop at x = 5 mol% followed by strong recovery at x > 5 mol%, while longitudinal and Bulk modulus showed weak and no recovery, respectively, with x. Infrared (IR) absorption spectra showed increase in intensity of NbO 6-assigned peak accompanied by increase in intensity of ZnO 4 tetrahedra and TeO 4 trigonal bipyramid (tbp) assigned peaks indicating formation of both non-bridging oxygen, NBO and bridging oxygen, BO, respectively, with addition of ZnO. The initial drop in ultrasonic velocity and related elastic moduli observed at x = 5 mol% indicates weakening of network rigidity of the glass system due to structural modification as a direct effect of TeO 2 reduction and existence of NBO. However, further replacement of TeO 2 by ZnO at x > 5 mol% contributed to increase in BO causing rigidity of the glass network to improve. In addition, hardness, H, was observed to increase with ZnO indicating increase in connectivity of the glass network while Poisson's ratio, σ, decreased indicating increase in cross-link density of the glass system. The combined results of ultrasonic velocity and IR absorption spectra suggest that the role of TeO 2 is very critical in the ternary glass system as, although ZnO addition showed improved rigidity due to recovery of shear modulus, the weakening of longitudinal and Bulk moduli indicates ZnO is not fully effective as glass former in place of TeO 2.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.