Abstract
Sodium 2,2’-methylene-bis (4,6-di-tert-butylphenyl) phosphate (commercial name: Irgastab NA-11) and N,N’-dicyclohexylnaphthalene-2,6-dicarboxamide (commercial name: NU-100) are highly effective nucleating agents for α-isotactic polypropylene (iPP) and β-isotactic polypropylene (iPP) respectively. Effects of a total concentration of 0.2 wt% NA-11/NU-100 compound nucleating agents with different ratios of NU-100 on mechanical properties and crystallization behaviors of iPP were studied in this paper. The results showed that good balance between decreased stiffness and increased toughness of iPP was realized when the ratio of NU-100 was 50 wt%. Compared with those of virgin iPP, tensile strength, tensile modulus, flexural strength, and flexural modulus of iPP nucleated by the compound nucleating agent with 50 wt% NU-100 decreased by only 2.9%, 4.8%, 3.8% and 6.1% respectively, while the notched Izod impact strength of the nucleated iPP was increased by 212.8%. In addition, differential scanning calorimetry analysis results showed that addition of the NA-11/NU-100 compound nucleating agent increased the peak crystallization temperature of iPP significantly, but the crystallization rate of the nucleated iPP decreased with increasing ratio of NU-100 in compound nucleating agents.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
