Effects of component geometries and inflow conditions on ejector operational mode

Abstract

The ejector system is a useful device for creating high altitude conditions for ground tests of supersonic engines. The ejector performance can be immediately changed by varying the ejector operational mode. The ejector nozzle pressure ratio is well known to have a significant effect of the operational mode of an ejector. However, the effects of the mixing duct length and other geometric design parameters on the ejector mode change have not been clearly determined. In this study, the effects of ejector component geometries and inflow conditions on ejector operational mode are investigated by numerical analysis. By changing the inflow conditions and geometric parameters, twelve test cases are studied. Using the numerical test results, the flow pattern and suction pressure performance of the ejector with a fixed secondary mass flow rate are compared. In the numerical test results, a high primary nozzle stagnation pressure induces a highly underexpanded flow, resulting in the critical operational mode. For the critical operational mode, the mixing duct must be sufficiently long to accommodate the shock train and the choking zone. Primary nozzles with wide angles also induce widely expanded nozzle flows and result in the critical operational mode.