Abstract
The effects of styrene-co-maleic anhydride (SMA) compatibilizer on the mechanical thermal and morphological properties of polyoxymethylene (POM)/acrylonitrile-butadiene-styrene (ABS) blends were inverstigated. POM/ABS blends without and with SMA compatibilizer were prepared by an internal mixer and molded by compression molding. It was found that the dispersion of ABS phase and compatibility could not improve by using SMA compatibilizer in POM/ABS blends due to SMA can be miscible with ABS phase more than POM phase. The addition of ABS in a range of 10-30 wt% could improve the Young’s modulus of POM. Impact strength, tensile strength and percent strain at break of POM/ABS blends decreased with increasing ABS content. The addition of compatibilizer improved Young’s modulus of POM/ABS (60/40, 50/50) blends. The addition of ABS increased the degradation temperature of POM, while SMA compatibilizer did not improve the degradation of POM/ABS blends.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
