Effects of Cold Gas Tungsten Arc Welding on Dissimilar DHP-CW024A Copper/304 SS Thin Lap Joint

Abstract

Copper and stainless steel possess distinct properties that make them suitable for different applications (i.e. e-mobility, nuclear power plants, etc.). However, the high thermal conductivity of copper presents a significant challenge in welding. In fact, researchers have explored various fusion welding processes for joining copper to steel and concluded that fusion welding is generally difficult or even unsuitable for obtaining sound and defects free joints. The present study investigated the feasibility of dissimilar lap joint between copper and stainless-steel thin plates using Cold Gas Tungsten Arc Welding (CGTAW) without a filler material and with no significant geometrical distortion of welded plates. The weld was created by consecutive partially overlapped spots, whose welding time varied between 100 and 150 ms, in upgraded conventional TIG machine equipped with cold TIG welding function. Samples made with 150 ms welding time showed a near-uniform distribution of equiaxed copper grain microstructure, while those obtained with 100 ms exhibited significant differences in grain size with the presence of steel inclusions in globule and vortex shapes. The joints demonstrated exceptional flexibility, allowing it to be bent up to a 180º angle without any visible damage. The maximum tensile strength of sample obtained with a welding time of 150 ms was 220 MPa with a fracture located in the heat-affected zone. The sample welded with a welding time of 100 ms exhibited 171 MPa of tensile strength with the fracture along the melting spot area due to pronounce mixing of welded materials. All the samples showed ductile behavior in the fracture zone. Eventually, the application of CGTAW resulted in promising at obtaining joint with good mechanical properties.