Abstract
The effects of choke ring dimension on the thermal and fluid flow in a practical SRU (sulfur recovery unit) thermal reactor are investigated numerically. It is found that zone 1 is a higher temperature region. In contrast, zone 2 is a lower temperature region. The average temperature for the rich oxygen supply is higher than that of normal oxygen supply. Without a choke ring, the temperature difference between zone 1 and zone 2 is smaller and the temperature in zone 1 becomes lower while the temperature in zone 2 becomes higher. In addition, the average temperature in zone 1 and the sulfur concentration at exit are the lowest without a choke ring. The reactor with a choke ring height of 0.74 m has the lowest peak temperature and the largest sulfur concentration at exit. Finally, with a choke ring height of 1.11 m, the blockage effect of the choke ring leads to the largest peak skin friction coefficient.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Transactions of the Canadian Society for Mechanical Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.