Effects of channel modification on microstructure and mechanical properties of C/SiC composites prepared by LA-CVI process

Abstract

Carbon fiber reinforced SiC matrix composites (C/SiC) with four different deposition channel sizes were fabricated via a novel laser-assisted chemical vapor infiltration (LA-CVI) method. Effects of infiltration channel sizes on microstructure and mechanical properties of C/SiC composites were investigated. The results showed that increasing the size of channels could expand infiltration passages and densification bands, which was consistent with theoretical calculations. Due to the presence of channels, the flexural strength of C/SiC composite increased by 14.47% when the channel diameter was 0.3 mm, compared to C/SiC composites prepared via conventional CVI process. Characteristics of matrix cracking and crack propagation on fracture surface were analyzed by using scanning electron microscopy. LA-CVI C/SiC composites displayed significantly improved damage-tolerant fracture behavior. Thus, findings of this work demonstrate that LA-CVI fabricated C/SiC composites are promising for a wide range of applications, particularly for enclosed-structure and thick-section C/SiC composites.