Effects of Cellulose Derivatives and Additives in the Spray-Drying Preparation of Acetaminophen Delivery Systems

Abstract

Microcrystalline cellulose (MCC), sodium carboxymethylcellulose (NaCMC), hydroxypropylmethylcellulose (HPMC), hydroxyethylcellulose (HEC), hydroxypro pylcellulose (HPC), and ethylcellulose (EC) were used for the production of time-controlled acetaminophen delivery systems using a spray-drying technique. The influence of factors such as polymer concentration, inlet temperature, and drug/polymer ratio were investigated. The product yields were a function of the type and concentration of the polymer, with the highest values being reached from feeds containing 1% MCC and EC. Parameters of 1% polymer concentration and an inlet temperature of 140°C gave rise to optimal processing conditions. Using these parameters, the influence of some adjuncts, such as polyethylene glycol 6000 (PEG 6000), dibutyl sebacate (DBS), polyvinylpyrrolidone (PVP), and carboxylic acids such as citric acid (CA), phthalic acid (PA), succinic acid (SA), tartaric acid (TA), and oxalic acid (OA), on the spray-drying process was evaluated. Of the additives tested, PVP (with MCC), DBS (with EC), and PEG 6000 (with NaCMC) induced yield decreases from 70% to 49%, 66% to 39%, and 37% to 17%, respectively. As for carboxylic acids (with NaCMC), similar or better performances of 43%, 45%, 47%, and 49% were obtained with SA, OA, PA, and TA, respectively. Dissolution studies in pH 1 dilute HCl and pH 6.8 phosphate buffer dissolution media showed that formulations consisting of 1% polymer with a drug/polymer ratio of 1/1 exhibited the slowest drug release, with the spheroids coated with NaCMC and HEC showing the longest T50% values (with 45 and 53 min at pH 1 and 49 and 55 min at pH 6.8, respectively). Slightly better sustained drug release in pH 6.8 dissolution medium was reached, showing the following trend: HEC > NaCMC > MCC > EC > HPMC. Concerning the additives, the trends in dissolution T50% of drug revealed TA > SA > CA > OA > PVP > PA > DBS in acidic pH 1 dissolution medium and PVP > OA > TA > SA > PA > CA > DBS in phosphate buffer at pH 6.8.