Abstract
Proton exchange membrane unitized regenerative fuel cells (PEM-URFCs) combine the ability to both produce power (in fuel cell mode) and generate fuel and oxidant (in electrolysis mode) from the same cell. Compared with discrete fuel cell and electrolyzer systems, URFCs provide the potential for lower mass, volume, and cost. The composition and structure of the bifunctional oxygen catalyst layer (CL), which facilitates the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) at the same electrode, significantly affects performance and stability, particularly given the wide potential differences and different mass transport phenomena involved under operation in fuel cell or electrolysis mode. We previously showed bimetallic nanoframes provide bifunctional oxygen electrocatalysts with significantly higher activity compared with monometallic structures, evaluated using a rotating disk electrode configuration.1 Here, we investigated the effects of the oxygen CL composition, loading, and spray parameters on the performance of URFC membrane electrode assemblies (MEAs). Pt black and IrO2 catalysts were combined at different ratios and deposited at different mass loadings. Catalyst layers were sprayed directly onto membranes using an ultrasonic spray system. Within ultrasonically sprayed catalyst layers, higher spray rates resulted in improved fuel cell performance. Higher catalyst loadings improved both fuel cell and electrolyzer performance, but reached a region of diminishing returns at higher loadings. The ratio of the ORR catalyst (Pt) to the OER catalyst (IrO2) modulated the performance in both fuel cell and electrolyzer modes. Different catalyst ratios influence the catalyst utilization at higher loadings. The comparison of URFC performance at same Pt or IrO2 loadings indicates that in addition to the active catalyst itself, the non-catalytically active component influences MEA performance. This result is in line with our previous evaluation of synergistic effects of Pt and IrO2 within rotating disk electrode measurements1 and supports that in addition to the significant effects of catalyst material structure on performance, the electrode structure plays a critical role in fuel cell and electrolyzer performance in URFC MEAs. Repeated switching of URFC MEAs between fuel cell and electrolysis modes indicates that reasonable performance is maintained over the initial cycles within our single cell test configuration. References Godínez-Salomón, F.; Albiter, L.; Mendoza-Cruz, R.; Rhodes, C.P. Bimetallic Two-dimensional Nanoframes: High Activity Acidic Bifunctional Oxygen Reduction and Evolution Electrocatalysts. ACS Appl. Energy Mater. 2020, 3, 2404-2421. http://dx.doi.org/10.1021/acsaem.9b02051
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
