Abstract
PurposeThis paper aims to explore the effects of mineral diesel fuel carbon soot (MCS) and biodiesel carbon soot (BCS) on the lubrication of polyalphaolefin (PAO) and diesel fuels.Design/methodology/approachTwo styles of carbon soot were prepared from the natural combustion of mineral diesel fuel oil (MDO) and biodiesel oil (BDO). Tribological tests were conducted on a high-frequency reciprocating rig. Friction surfaces were characterized using three-dimensional laser scanning confocal microscopy and Raman spectroscopy.FindingsThe addition of MCS and BCS to PAO could reduce friction in most cases. MCS had a negligible effect on the wear for contents not exceeding 1.0 per cent. By contrast, BCS exhibited a considerable negative influence on the wear resistance even at low contents. For diesel fuels, MCS reduced both friction and wear, whereas BCS substantially deteriorated the lubrication of BDO. MCS formed a Fe3O4/C composite lubricating film on the friction surface. BCS also entered the contact region, but it did not form an effective Fe3O4/C composite lubricating film.Originality/valueThis work compared MDO and BDO from a different perspective, i.e. the effects of their combustion carbon soot on the lubrication of lubricating oil and fuel oil. The significant negative effect of BCS on the lubrication of lubricating oil and BDO is a problem that could occur in the industrial application of BDO.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
