Effects of carbon doping on annealing behavior of a CoCrFeNiMn high-entropy alloy

Abstract

A 1 at% carbon non-equiatomic doped Co19Cr5Fe38Ni19Mn19 high-entropy alloy was synthesized by vacuum arc-melting in a high-purity argon atmosphere, followed by homogenization, cold rolling, and annealing under various conditions. The evolutions of microstructure and mechanical properties during annealing were systematically studied and compared with the carbon free alloy. Results showed that nano-sized fibrous deformation grains were formed in the 90% cold rolled alloys, resulting in high strength but low plasticity. Recovery sub-structures and recrystallized grains gradually formed with increasing annealing temperature, leading to a significant decrease in defect density, thereby softening the materials and increasing their plasticity. The early stage of recovery was mainly related to the migration of vacancy and interstitial carbon atoms, while dislocation climb became the main recovery mechanism in the late recovery stage. The carbon-doped alloy exhibited a higher recovery activation energy compared with the carbon free alloy. Therefore, 1 at% interstitial carbon effectively increased the recovery and recrystallization resistance of the Co19Cr5Fe38Ni19Mn19 alloy.