Abstract
In this study, the adsorption and UV photocatalytic degradation of atrazine using nano-TiO2 particles were studied systematically, and the colloidal stability of nano-TiO2 particles in solution was also investigated to reveal the removal mechanism. Experiments which contained the first 6.0 hours darkness and 4.0 hours UV illumination later were conducted at different concentrations of Ca2+ and/or fulvic acids (FA) at pH = 7.0. Results showed that the adsorption rate of atrazine onto nano-TiO2 particles decreased with the increase of Ca2+ and/or FA concentrations, which could be explained well by the colloidal stability of nanoparticles. When the solution contained Ca2+ or Ca2+-FA, the nanoparticles were aggregated together leading to the decrease of the contact surface area. Besides, there existed competitive adsorption between FA and atrazine on the particle surface. During photocatalytic degradation, the increase of Ca2+ and/or FA concentration accelerated the aggregation of nano-TiO2 particles and that reduced the degradation efficiency of atrazine. The particle sizes by SEM were in accordance with the aggregation degree of nanoparticles in the solutions. Sedimentation experiments of nano-TiO2 particles displayed that the fastest sedimentation was happened in the CaCl2 and FA coexistent system and followed by CaCl2 alone, and the results well demonstrated the photodegradation efficiency trends of atrazine by nano-TiO2 particles under the different sedimentation conditions.
Highlights
Pesticides are still produced in large quantities and used in agricultural pest and weed control
Elemental analysis by energy dispersive X-ray (EDX) of the TiO2 particles (Fig. S1b) showed that the particles were consisted of Ti (58.76 wt%), O (40.56 wt%) and a small amount of silicon impurity (0.58 wt%)
The adsorption and photocatalytic degradation of atrazine by nano-TiO2 were negatively affected by the addition of Ca2+ and fulvic acids (FA) in aqueous solutions
Summary
Pesticides are still produced in large quantities and used in agricultural pest and weed control. Most pesticides, such as triazophos and amitrole, are refractory organics and pose a potential threat to ecosystems and man where they are applied[1,2]. Current methods for removing atrazine include physical, chemical, biological and hybrid treatment techniques[8,9,10]. Among these methods, photocatalysis is an efficient technology that has been extensively studied for the removal of pesticides[11,12]. Under UV irradiation, TiO2 generate electron hole pairs producing reactive species from water (such as hydroxyl radicals) so that pesticides can be degraded[20]
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have