Abstract
It is necessary to identify differences among biaxial tensile mechanical properties to describe the plastic anisotropy and potential adjustment ability of yield criteria with the non-integer exponent for the yield surface. Therefore, in this study, uniaxial and cruciform biaxial tensile tests were performed under 17 different loading paths: uniaxial tension in seven different directions, cruciform biaxial tension in rolling/transverse and 45°/135° sampling directions with seven and three different stress ratios, respectively. Based on the BBC2008 yield criterion, the uniaxial yield stresses, rθ-values, yield loci on the normal plane, and shear yield loci on the diagonal plane, predicted using six parameter identification strategies, were quantitatively evaluated for MP980, DP490, 6016-T4, and 5182-O. Results show the constraining and regulation ability of the equi-biaxial tensile data for yield loci to be better than that of near-plane strain state data. The parameter identification strategy considering the non-integer exponent was observed to significantly improved the ability of the yield criterion to describe the anisotropic yield behavior. For a simplified evaluation system that considers only the prediction accuracy of the yield locus under the principal stress state, neglecting the prediction accuracy for the shear yield locus may lead to incorrect judgments regarding the best identification strategy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.