Effects of bacterial inoculation and nitrogen loading on bacterial-algal consortium composition and functions in an integrated photobioelectrochemical system.

Abstract

An integrated photo-bioelectrochemical system (IPB) for wastewater treatment combines a microbial fuel cell with an algal bioreactor, eliminating requirements for aeration, promoting electricity generation, remediating nutrients and producing algal biomass for conversion into biofuel or other bioproducts. To examine strategies for improving IPB functions of electrochemical output and nutrient removal efficiency, this study tested effects of cathode bacterial inoculation and nitrogen loading on cathode microbial community and IPB performance. IPB cathodes were inoculated with the green alga Chlorella vulgaris, in combination with nitrite-oxidizing bacteria (NOB) Nitrobacter winogradskyi, and/or ammonium-oxidizing bacteria (AOB) Nitrosomonas europaea. IPB performance was examined before and after nitrifying bacteria inoculations and under three ammonium loading concentrations in the wastewater medium. Bacterial communities in the cathode suspension and biofilm were examined by 16S rRNA gene sequence analysis. Relative to the algae only control, cathode inoculation with NOB and/or AOB improved net nutrient removal, but resulted in reduced dissolved oxygen availability, which impaired electricity generation. Higher ammonium loading increased electricity production and nutrient removal, possibly by overcoming algal-bacterial competition. Inoculation with nitrifying bacteria resulted in minor changes to total bacterial composition and AOB or NOB comprised <3% of total sequences after 1month. Community composition changed more dramatically following increase in ammonium-N concentration from 40 to 80mgL-1. Manipulation of N loading could be a useful strategy to improve IPB performance, while inoculation of AOB or NOB may be beneficial for treatment of water with high ammonium loading when N removal is the primary system goal.