Effects of area discontinuity at nozzle inlet on the characteristics of self-resonating cavitating waterjet

Abstract

The current research on self-resonating cavitating waterjet(SRCW) mainly focuses on the generation mechanism and structure optimization. Researches relating to the influences of disturbances at nozzle inlet on the characteristics of the jet are rarely available. In order to further improve the performance of SRCW, effects of area discontinuity(enlargement and contraction) are experimentally investigated using three organ-pipe nozzles. Axial pressure oscillation peak and amplitude as well as aggressive erosion intensity of the jet are used to evaluate the effects. The results reveal that area enlargement and contraction affect the peak differently, depending on the inlet pressure, nozzle geometry, and standoff distance; while area contraction always improves the amplitude regardless of these factors. At inlet pressures of 10 MPa and 20 MPa, area discontinuity improves the peak at almost all the testing standoff distances, while this only happens at smaller standoff distances with the inlet pressure increased to 30 MPa. The capability of area discontinuity for improving the amplitude is enhancing with increasing inlet pressure. Moreover, the cavitation erosion ability of the jet can be largely enhanced around the optimum standoff distance, depending on the type of area discontinuity and nozzle geometry. A preliminary analysis of the influence of area discontinuity on the disturbance waves in the flow is also performed. The proposed research provides a new method for effectively enhancing the performance of SRCW.