Abstract
Hydroxyapatite (HA) coatings were deposited on titanium substrates by electrophoretic deposition (EPD) at constant voltage and dynamic voltage, respectively. Various surface morphologies were observed under different type of voltages. Under a constant voltage of 20 V, a dense HA coating could be prepared. Under a constant voltage of 200 V, big HA particles were deposited and the coating was porous. Under a dynamic voltage, a continuous gradient HA coating could be obtained. HA coatings were characterized with a field emission-scanning electron microscopy (FE-SEM) and an X-ray diffraction (XRD). XRD indicated no significant HA decomposition when the coatings were sintered for 2 h at 800 degrees C.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Biomedical Materials Research Part B: Applied Biomaterials
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.