Abstract

In order to investigate the effects of altitude on the brake thermal efficiency of heavy-duty diesel engines, an experimental study on a heavy-duty diesel engine operating at various altitudes was conducted. Tests were conducted in low and moderate load and speed conditions. Brake thermal efficiency at four altitudes, including 0 m, 1600 m, 3300 m and 4500 m, was tested. A mobile engine bench which was specifically designed for mobile engine test was employed. The engine was working at low and moderate speeds and loads during the tests. The results indicated that brake thermal efficiency (with unchanged SOI (Start of Injection) at various altitudes) dropped with the rising of altitude; especially for the low-speed, low-load cases. Additionally, a few reasons to lower brake thermal efficiency at high altitude were analyzed, which indicated that factors including delayed combustion start, lowered factual expansion ratio, decreased specific heat ratio of the air–fuel mixture, aggravated ineffectiveness of turbocharger, deformed fuel spray and enhanced heat transfer, contributed to the deterioration of brake thermal efficiency in high altitude regions.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.