Effects of active chitosan‐flaxseed mucilage‐based films on the preservation of minced trout fillets: A comparison among aerobic, vacuum, and modified atmosphere packaging

Abstract

The objectives of the current study were to examine physical–mechanical, structural, and morphological characteristics of chitosan‐flaxseed mucilage films enriched with Ziziphora clinopodioides essential oil (ZEO; 0%, 0.25%, and 0.5%) and sesame oil (SO; 0% and 0.75%) and to provide useful information for the preservation of minced trout fillet's using antimicrobial films under aerobic, vacuum, and modified atmosphere conditions for 16 days. The films showed thickness, tensile strength, puncture force, puncture deformation, water vapor transmission rate, water vapor permeability, swelling index, and oxygen permeability values ranging 0.082–0.86 mm, 33.34–46.83 MPa, 25.69–53.08 N, 11.45–28.45 mm, 17.48–26.73 g/m2 h, 8.57–12.49 × 10−4 g mm/m2 h Pa, 12.45–38.43%, and 3.02–13.32 × 10−12 cm3/m2 s Pa, respectively. The following order of effect on the microbial spoilage population of treated samples was found in the applied packaging methods: modified atmosphere packaging > vacuum packaging > aerobic packaging. The final microbial population of treated samples was 0.35–4.91 log CFU/g lower than the controls after 16 days of refrigerated storage. At the end of the storage, the total volatile base nitrogen, peroxide value, and thiobarbituric acid reactive substances of untreated samples were 34.02–48.6 mg of N/100 g, 1.43–2.32 meq of peroxide/1000 g, and 3.33–4.24 mg of malondialdehyde/kg, respectively. The lowest corresponding values were recorded for the treated samples with ZEO 0.5% + SO 0.75% films by 14.26–17.73 mg of N/100 g, 0.48–0.86 meq of peroxide/1000 g, and 1.08–1.48 mg of malondialdehyde/kg, respectively.