Abstract
The structural properties, crystalline quality and surface morphology of CdTe thin films without and with a ZnTe buffer layer grown on (001)GaAs by molecular beam epitaxy (MBE) have been studied. CdTe thin film directly prepared on GaAs substrate displays (111) orientation with an island growth mode, whereas the CdTe epilayers with a ZnTe buffer are (001)-oriented single-crystalline film with a two-dimensional (2D) growth mode. The morphology and surface root-mean-square (RMS) roughness of CdTe epilayers are also dramatically improved by using a ZnTe buffer. Furthermore, it is suggested that the high-temperature (HT) ZnTe buffer grown at 360 °C is more efficient for enhancing CdTe structural quality than the low-temperature (LT) one at 320 °C. The CdTe epilayer on the HT-ZnTe buffer shows a narrower full-width at half-maximum (FWHM) of double-crystal X-ray rocking curve (DCXRC) for (004) reflection and a smaller RMS roughness.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.