Abstract
Effects of a rotating cone in 3D mixed convection of CNT-water nanofluid in a double lid-driven porous trapezoidal cavity is numerically studied considering magnetic field effects. The numerical simulations are performed by using the finite element method. Impacts of Richardson number (between 0.05 and 50), angular rotational velocity of the cone (between −300 and 300), Hartmann number (between 0 and 50), Darcy number (between 10 and ), aspect ratio of the cone (between 0.25 and 2.5), horizontal location of the cone (between 0.35 H and 0.65 H) and solid particle volume fraction (between 0 and 0.004) on the convective heat transfer performance was studied. It was observed that the average Nusselt number rises with higher Richardson numbers for stationary cone while the effect is reverse for when the cone is rotating in clockwise direction at the highest supped. Higher discrepancies between the average Nusselt number is obtained for 2D cylinder and 3D cylinder configuration which is 28.5% at the highest rotational speed. Even though there are very slight variations between the average Nu values for 3D cylinder and 3D cone case, there are significant variations in the local variation of the average Nusselt number. Higher enhancements in the average Nusselt number are achieved with CNT particles even though the magnetic field reduced the convection and the value is 84.3% at the highest strength of magnetic field. Increasing the permeability resulted in higher local and average heat transfer rates for the 3D porous cavity. In this study, the aspect ratio of the cone was found to be an excellent tool for heat transfer enhancement while 95% enhancements in the average Nusselt number were obtained. The horizontal location of the cone was found to have slight effects on the Nusselt number variations.
Highlights
Mixed convection in cavities due to moving surfaces has been a subject of many important heat transfer applications in electronic cooling, convective drying, solar power, some chemical engineering processes, and many others [1,2]
Impacts of a rotating cone with MHD effects are considered for the mixed convection of carbon nano-tube (CNT)-water nanofluid in a double lid-driven 3D trapezoidal cavity
Different behaviors of average heat transfer with respect to changes in the Richardson number is observed depending upon the angular rotational speed of the cone
Summary
Mixed convection in cavities due to moving surfaces has been a subject of many important heat transfer applications in electronic cooling, convective drying, solar power, some chemical engineering processes, and many others [1,2]. A rotating cone is used in three dimensional mixed convection of double lid driven trapezoidal porous enclosure considering magnetic field effects with CNT-water nanofluid. These particles were found to be very promising in the heat transfer enhancement in comparison with the other nanoparticles [48,49]. Owing to the diversity in the application of mixed convection in lid-driven cavities for many thermal engineering problems, use of magnetic field with very highly conductive nanoparticles and using a rotating cone provide promising multiple methods for convective heat transfer control in many heat transfer engineering problems
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
