Abstract
This project documents the impact of a porous asphalt overlay on the quality and quantity of highway storm-water runoff. A permeable friction course, also known as open graded friction course, is a layer of porous asphalt approximately 50 mm thick, which is often applied on top of conventional asphalt or concrete highways to enhance safety and reduce noise. Storm-water runoff from a four-lane divided highway in the Austin, Texas area was monitored at two sites before and after the installation of a PFC. Observed concentrations of total suspended solids and pollutants associated with particulate material were much lower in the runoff from the PFC than that derived from the conventional asphalt surface. Concentration reductions were observed for total suspended solids, total lead, total copper, and total zinc at both monitoring locations. In addition to the above-mentioned constituents, concentrations of chemical oxygen demand and total Kjeldahl nitrogen were also lower in the runoff from the PFC at a site collecting paired samples from both pavement types. Concentrations of dissolved constituents were not significantly different and concentrations of polycyclic aromatic hydrocarbons were below the detection limit for both pavement types. The runoff coefficient for the PFC appears to be higher than for conventional pavements.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
