Abstract
This study investigated the morphological and electromechanical characteristics of 0.2PZN-0.8PZT films fabricated using a PbTiO3 layer. Crack-free 1-microm-thick films with a pure perovskite phase were obtained on Pt/Ti/SiO2/Si substrates using a modified sol-gel deposition method. A highly dense and smooth morphology and a high piezoelectric coefficient (d33) of 230 pC/N were observed in a 0.2PZN-0.8PZT film with a PbTiO3 insertion layer after annealing at 750 degrees C. The as-produced sol-gel-driven 0.2PZN-0.8PZT thin films are attractive for application to piezoelectrically operated microelectronic actuators, sensors, or energy harvesters due to their low facility cost, smooth surface, and excellent electromechanical characteristics.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
