Abstract
Asphalt solar collectors (ASCs) offer a low-cost and reliable alternative to harvest energy from available infrastructures such as roads and pathways by employing the simple techniques. This paper represents an experimental study to evaluate the effectiveness of continuous and discontinuous-flow strategies in the dynamics and performance of a self-constructed ASC under field conditions. To this aim, an ON/OFF switching controller commands to run and stop the system at different time intervals. During the experimental simulations, all the crucial environmental and operational parameters were measured and monitored. This approach assesses the effects of numerous scenarios with different intervals of time on the dynamics of the constructed collector. Continuous and discontinuous-flow strategies were evaluated by comparing three different scenarios, including continuous-flow mode, 5 min OFF-mode and, 10 min OFF-mode. The results show that by extending the OFF-mode, the water is kept stagnant in the hot embedded pipes for more extended periods. Therefore, the temperature difference at the inlet and outlet of collector reduces, and the water leaves the collector at higher temperatures; however, the efficiency of the ASC decreases. Also, even though extending the OFF-mode results in heated water exits the collector at higher temperatures, but the mass of heated water decreases due to continuous interruption of current flow. The test results prove that in continuous-flow strategy, cumulative heat gain improves. Therefore, the continuous-flow strategy shows higher performance than introduced discontinuous-flow strategy. The exergy analysis illustrates that the available useful exergy has significantly affected by considering the pump consumed energy.
Highlights
Asphalt solar collectors (ASCs) offer a low-cost and reliable alternative to harvest energy from available infrastructures such as roads and pathways by employing the simple techniques
By increasing the velocity of the wind blowing over the collector surface, the convective heat transfer coefficient improves that results in more heat dissipation from the top surface of the collector
The main subject of the present study is to investigate the effectiveness of employing continuous and discontinuousflow strategies (ON-OFF control strategy) in the performance of ASCs in field conditions
Summary
Asphalt solar collectors (ASCs) offer a low-cost and reliable alternative to harvest energy from available infrastructures such as roads and pathways by employing the simple techniques. This paper represents an experimental study to evaluate the effectiveness of continuous and discontinuous-flow strategies in the dynamics and performance of a self-constructed ASC under field conditions. The current study represents an experimental analysis of a self-constructed ASC integrated with an ON/OFF switching controller to observe the thermal dynamics and performance of the ASC under the continuous and discontinuous-flow strategies.
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
