Abstract

The results of a feasibility study are presented on the use of a polystyrene (PS) organic membrane as a photocatalyst support in the degradation of organic pollutants in aqueous solution. Methylene blue (MB) was employed as a model dye and commercial titanium dioxide (TiO2) was used as a photocatalyst. The MB dye which is resistant to direct photolysis especially at high concentrations was successfully eliminated by TiO2 fixed on the PS membrane in aqueous dispersion under solar irradiation. Photodegradation results of MB showed that the film with 10 wt% TiO2 exhibited a remarkable ultraviolet (sun light) photocatalytic activity over 5 h, with 68% of the pollutant being degraded. This is similar to a TiO2 slurry system. The photocatalytic degradation obeyed pseudo-first-order kinetics at low initial MB concentration. The optimum pH for efficient removal of dye was found to be 11. An increase in initial dye concentration decreased the degradation rate. The applicability of Langmuir–Hinshelwood kinetic equation revealed that the degradation of MB occurred mainly on the surface of the photocatalyst. The concept and results provide a promising platform for fabricating highly efficient organic photocatalytic membranes for water treatment.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call