Effective visible-light-driven photocatalytic degradation of fenitrothion by s-gC3N4/Ag-Au bimetallic nanocomposite

Abstract

ABSTRACT This paper reports on the optimization of fenitrothion photocatalytic degradation in visible light based on Plackett Burman (PB) design and central composite design (CCD) in response surface methodology (RSM). A herbicide routinely used with a negative impact on the environment is fenitrothion, which must be degraded to minimize the impact on the environment. For fenitrothion degradation, Ag-Au bimetallic nanoparticles on the semiconducting s-doped gC3N4 surface were synthesized using the galvanic exchange. The properties of s-gC3N4/Ag-Au bimetallic nanocomposite were confirmed by various methods. Significant factors responsible for fenitrothion photocatalytic degradation were determined using Plackett-Burman (PB) design and were catalyst dosage, initial fenitrothion concentration, H2O2 concentration, pH, and rotational speed. Central composite design (CCD) design was used for further optimization. The optimum conditions for the maximum degradation of fenitrothion (100%) constraints were found to be 100% an amount of H2O2 concentration 60 mM, pH 10, rotational speed 700 rpm. These results showed that s-gC3N4/Ag-Au bimetallic nanocomposite could act as a suitable photocatalyst under visible light in the degradation of fenitrothion. By removing fenitrothion from real water samples, as well as by maintaining its stability and reusability in five successive cycles, the practicality of this nanocomposite was demonstrated.