Abstract

This study is focused on the development of solid acid catalysts for the synthesis of long chain fatty acids. A series of WO3–ZrO2 catalysts were prepared by co-precipitation method and tested in the synthesis of cetyl palmitate. The effect of WO3 loading (10, 15, and 20 wt% WO3) and calcination temperature (700 and 800 °C) on the catalyst properties and activity was investigated. XRD and Raman analysis confirmed that WO3 loading stabilized the tetragonal zirconia phase. Higher calcination temperature enhanced the acidities of the catalysts. WO3–ZrO2 catalysts were found to be very efficient for the synthesis of cetyl palmitate with high selectivity. These catalysts were tested for different reaction temperatures (135 and 162 °C), feed composition and catalyst amounts. The highest cetyl palmitate yield (98.4%) was obtained over the catalyst calcined at 800 °C with 15 wt% WO3, which had the highest total acidity. The catalysts preserved their activities up to three reuse.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.