Abstract
The average power of fiber lasers has been scaled deeply into the kW regime in the past years. However, stimulated Raman scattering (SRS) is still a major factor limiting further power scaling. Here, we have demonstrated for the first time, to the best of our knowledge, the suppression of SRS in a half 10 kW tandem pumping fiber amplifier using chirped and tilted fiber Bragg gratings (CTFBGs). With specially self-designed and manufactured CTFBGs inserted between the seed laser and the amplifier stage, a maximum SRS suppression ratio of >15 dB in spectrum is observed with no reduction in laser efficiency. With one CTFBG, the effective output power is improved to 3.9 kW with a beam quality M2 factor of ∼1.7 from 2; with two CTFBGs, the effective laser power reaches 4.2 kW with an increasing ratio of 20% and an M2 factor of ∼1.8, and further power improvement is limited by the power and performance of the 1018 nm pump sources. This work provides an effective SRS suppression method for high-power all-fiber lasers, which is useful for further power scaling of these systems.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.