Abstract

Chitosan-based photocatalyst composites containing CdS nanocrystals with and without glutaraldehyde or epichlorohydrin cross-linking treatments were investigated and the catalyzed photodegradation of methyl orange in aqueous solution was examined. In addition, the effects of catalyst dosage, initial dye concentration, and initial pH of the dye solution on the photodegradation kinetics were investigated. In this study, the effect of initial solution pH was more important than other factors. The photocatalyst composite could remove 99% dye in 80 minutes at pH 4. The catalyst composite was characterized by using X-ray diffraction (XRD), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), fourier transform infrared (FT-IR), and visible reflectance spectroscopy. The dye removal mechanism of methyl orange involved an initial sorption process followed by photodegradation. The sorption process underwent the pseudo-second order kinetics, while photodegradation followed the Langmuir-Hinshelwood kinetics. Although the glutaraldehyde cross-linked chitosan enhanced the initial dye sorption, the epichlorohydrin cross-linked catalyst composite demonstrated a better overall dye removal performance, especially in the photodegradation step. Both chitosan encapsulated catalyst with and without epichlorohydrin cross-linking demonstrated the same pseudo-first order photodegradation kinetic constant of 0.026 min−1and the same dye removal capacity. The catalyst composite could be reused but the photocatalytic activity dropped successively in each cycle.

Highlights

  • The textile industry is a major source of textile wastewater pollution [1]

  • In order to ensure the color removal in the photodegradation step instead of adsorption, the amount of residual dye that had been adsorbed onto the photocatalyst composite after photodegradation was determined by (1) soaking the used photocatalysts into 40 mL 0.5 M NaOH solution and (2) measuring the concentration of dye extracted from the used photocatalysts

  • The peak at 2θ = 19.8∘ might be the crystalline peak of chitosan [42], and the broadness of X-ray diffraction (XRD) peaks indicated the existence of nanocrystals

Read more

Summary

Introduction

The textile industry is a major source of textile wastewater pollution [1]. Wastewater from textile plants often contains pollutants with intense color and requires treatment before discharge. Nanocatalysts are prone to aggregate and reduce catalytic efficiency as the aggregation impedes the transfer of light-generated charge carriers to surface and increase the probability of recombination [3, 13, 15, 18,19,20]. Some semiconductors, such as CuO [20] and CdS [14, 21], are vulnerable to photocorrosion and International Journal of Chemical Engineering would release heavy metals that are secondary pollutants. As fluidized bed reactor allows excellent contact between catalysts and reactants as well as good heat and mass transfer [30,31,32], a fluidized bed photoreactor with an immersed lamp tube was adopted in this work

Experimental
Results and Discussion
Conclusion
Conflict of Interests
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call