Abstract

Chemical conditioning before mechanical dewatering is an indispensable step to enhance the waste activated sludge (WAS) dewaterability and solid-liquid separation. Feasibility of utilizing Fe(II)/S2O82− oxidation integrated with microwave irradiation (MW) in improving gel-like floc destruction, water seepage and WAS dewaterability was investigated. Comprehensive characterization of the treated WAS was conducted to explore the effects of MW on the catalyzing kinetics of Fe(II)/S2O82− oxidation and reveal the underlying dewatering principle. The results demonstrated that MW-Fe(II)/S2O82–process was more cost-efficient, reagent-saving than single Fe(II)/S2O82− oxidation or MW irradiation in stimulating WAS dewaterability and the optimal conditions were 0.4/0.5 mmol-Fe(II)/S2O82− g−1-TS (total solids) and 500 W with 94.6% capillary suction time (CST) reduction within 120 s of conditioning. Thermal effect of MW reduced the activation energy of S2O82− decomposition and stimulated the generation of more SO4−· while athermal effect could create additional gel-network destruction and cell lysis, which reduced the water-binding energy and induced the seepage of more extracellular polymeric substances (EPS)-bound and cell water. Further analysis via fluorescence excitation-emission matrix combined with parallel factor analysis demonstrated that protein-like, humic- and fulvic-like substances in slime EPS (S-EPS) and loosely bound EPS (LB-EPS) together affected sludge dewaterability. Additionally, the hybrid process could further remove the released COD and ammonia, facilitating the subsequent advanced treatment.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call