Abstract

Multilayer stacks in the sequence c-Si/(Al2O3/SiO2)n with n = 1 (single multilayer stacks) or n = 3 (triple multilayer stacks) were deposited at different temperatures by plasma-enhanced atomic layer deposition (PEALD) with varying Al2O3 thickness to investigate the formation of dipoles or trapped charges at the interfaces and their effect on the surface passivation quality. It was shown that the field-effect passivation deteriorated in multilayer stacks compared to an Al2O3 single layer as flat-band voltage (Vfb) and total amount of effective charges (Qtot) were lower than Al2O3 reference layer (Al2O3 single layer) (Vfb = 2.36 V and Qtot = −1.13 × 1013 cm−3). However, choosing the right process conditions, the chemical passivation is comparable to the Al2O3 reference layer. Multilayer stacks deposited at 250 °C with 3 nm of Al2O3 interlayers exhibited a superior chemical passivation with effective lifetimes (τeff) of 11 ms, characterized by a very low interface trap density (Dit), which was comparable to the Al2O3 reference layer. Furthermore, it was observed that field-effect passivation could be tuned by manipulating Qtot in the multilayer stacks by applying a voltage stress (Vstress) of varying magnitude, duration and polarity (voltage of particular magnitude and sign applied for a specific time) before the capacitance–voltage measurement. The charge dynamics demonstrated that Qtot shifted from their original values under the effect of Vstress which showed a high Vfb shift (∼6.5 V), providing a gateway in tailoring the field-effect passivation quality of multilayer stacks on c-Si. Nevertheless, bias-photoconductance measurements reveal a degradation of τeff after the application of high bias voltages which correlated with a strong increase of Dit after the Vstress application.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.