Effect on vehicle and track interaction of installation faults in the concrete bearing surface of a direct-fixation track

Abstract

Various installation faults can occur in fasteners in the construction of a direct-fixation track using the top-down method. In extreme cases, these faults may cause excessive interaction between the train and track, compromise the running safety of the train, and cause damage to the track components. Therefore, these faults need to be kept within the allowable level through an investigation of their effects on the interactions between the train and track. In this study, the vertical dynamic stiffness of fasteners in installation faults was measured based on a dynamic stiffness test by means of an experimental apparatus that was devised to feasibly reproduce installation faults with an arbitrary shape. This study proposes an effective analytical model for a train–track interaction system in which most elements, except the nonlinear wheel–rail contact and some components that behave bilinearly, exhibit linear behavior. To investigate the effect of the behavior of fasteners in installation faults in a direct-fixation track on the vehicle and track, vehicle–track interaction analyses were carried out, targeting key review parameters such as the wheel load reduction factor, vertical rail displacement, wheel load, and mean stress of the elastomer. From the results, it was noted that it is more important for the installation faults in the concrete bearing surface of a direct-fixation track to be limited for the sake of the long-term durability of the elastomer rather than for the running safety of the train or the structural safety of the track.