Abstract
A feedback control system for the stabilization of resistive wall mode (RWM) was applied to a low-aspect-ratio reversed field pinch (RFP) with minimum power supply capabilities to control the single mode. The system consists of 64 saddle coils (4 and 16 in poloidal and toroidal direction, respectively) in the actuator covering the whole torus on the outer surface of the vacuum vessel. The sensor coils also have the same structure. The saddle coils are connected in series to control the single m/n = 1/2 mode, which has the largest growth rate in RELAX. The radial component of the magnetic field from the sensor coils was suppressed to the preset level and the m/n = 1/2 magnetic mode, which otherwise grows with field penetration time of the vessel, was reduced to 0.1% of the edge poloidal field throughout the discharge. The RFP discharge duration has been extended to ∼3.5 ms, the upper bound determined by the saturation of the iron core. Finally, the MHD control issues in a low-A machine are discussed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
