Abstract
Introduction Glass ionomer cements (GICs) are commonly used for cementation of indirect restorations. However, one of their main drawbacks is their inferior mechanical properties. Aim Compositional modification of conventional glass ionomer luting cements by incorporating two types of all-ceramic powders in varying concentrations and evaluation of their film thickness, setting time, and strength. Material & Methods. Experimental GICs were prepared by adding different concentrations of two all-ceramic powders (5%, 10, and 15% by weight) to the powder of the glass ionomer luting cements, and their setting time, film thickness, and compressive strength were determined. The Differential Scanning Calorimetry analysis was done to evaluate the kinetics of the setting reaction of the samples. The average particle size of the all-ceramic and glass ionomer powders was determined with the help of a particle size analyzer. Results A significant increase in strength was observed in experimental GICs containing 10% all-ceramic powders. The experimental GICs with 5% all-ceramic powders showed no improvement in strength, whereas those containing 15% all-ceramic powders exhibited a marked decrease in strength. Setting time of all experimental GICs progressively increased with increasing concentration of all-ceramic powders. Film thickness of all experimental GICs was much higher than the recommended value for clinical application. Conclusion 10% concentration of the two all-ceramic powders can be regarded as the optimal concentration for enhancing the glass ionomer luting cements' strength. There was a significant increase in the setting time at this concentration, but it was within the limit specified by ISO 9917–1:2007 specifications for powder/liquid acid-base dental cements. Reducing the particle size of the all-ceramic powders may help in decreasing the film thickness, which is an essential parameter for the clinical performance of any luting cement.
Highlights
Glass ionomer cements (GICs) are commonly used for cementation of indirect restorations
Differential Scanning Calorimetry (DSC) Analysis. e enthalpy would have got altered if the sample underwent a physical or chemical change. e differential scanning calorimetry analysis in our study showed greater enthalpy changes in the experimental glass ionomer cements compared to the control, which is indicative of delayed setting reaction (see Figures 7(a)–7(d))
A significant increase in strength was exhibited by experimental GICs containing 10% all-ceramic additives in both groups compared to their controls
Summary
Glass ionomer cements (GICs) are commonly used for cementation of indirect restorations One of their main drawbacks is their inferior mechanical properties. Aim. Compositional modification of conventional glass ionomer luting cements by incorporating two types of all-ceramic powders in varying concentrations and evaluation of their film thickness, setting time, and strength. Experimental GICs were prepared by adding different concentrations of two allceramic powders (5%, 10, and 15% by weight) to the powder of the glass ionomer luting cements, and their setting time, film thickness, and compressive strength were determined. A significant increase in strength was observed in experimental GICs containing 10% all-ceramic powders. Among the various dental cements available in the market, resin cements and glass ionomer cements (GIC) are the most frequently used for cementation of the fixed partial dentures. Apart from this, the presence of residual monomer in the cement may raise some biocompatibility issues. e glass ionomer
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.