Abstract
The laser cladding of Fe power technology was used to repair worn plunger piston surface. The microstructure of cladding layer, binder course and the matrix were observed by OM and SEM. Besides, the micro-hardness of different zones was measured through micro-hardness testing. The results show that the matrix metal microstructure of plunger piston is made of ferrite and austenite. By laser cladding Fe-based power on base metal, the cladding layer grain is fine and uniform, grain growth has obvious direction and finally become dendrites oriented, the microstructure of cladding layer is both second-phase hard particles and Fe-based solutes. The combination between matrix and cladding layer is smooth, belong to metallurgy bonding. The hardness of cladding layer is higher than that of other parts in three parts, the max value of micro-hardness is about 1250HV, it can agree with wear resistance need of plunge piston surface.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
