Effect of Zr on Microstructure of Metallic Glass Coatings Prepared by Gas Tunnel Type Plasma Spraying

Abstract

Metallic glass is one of the most attractive advanced materials, and many researchers have conducted various developmental research works. Metallic glass is expected to be used as a functional material because of its excellent physical and chemical functions such as high strength and high corrosion resistance. However, the application for small size parts has been carried out only in some industrial fields. In order to widen the industrial application fields, a composite material is preferred for the cost performance. In the coating processes of metallic glass with the conventional deposition techniques, there is a difficulty to form thick coatings due to their low deposition rate. Thermal spraying method is one of the potential candidates to produce metallic glass composites. Metallic glass coatings can be applied to the longer parts and therefore the application field can be widened. The gas tunnel plasma spraying is one of the most important technologies for high quality ceramic coating and synthesizing functional materials. As the gas tunnel type plasma jet is superior to the properties of other conventional type plasma jets, this plasma has great possibilities for various applications in thermal processing. In this study, the gas tunnel type plasma spraying was used to form the metallic glass coatings on the stainless-steel substrate. The microstructure and surface morphology of the metallic glass coatings were examined using Fe-based metallic glass powder and Zr-based metallic glass powder as coating material. For the mechanical properties the Vickers hardness was measured on the cross section of both the coatings and the difference between the powders was compared.