Abstract
The effect of glass addition on the properties of CaCu3Ti4O12 (CCTO) electroceramics was studied. CCTO and ZnO-B2O3-SiO2 (ZBS) glass additive were prepared using solid state reaction and melt quench techniques respectively. Both the raw materials of CCTO and ZBS were wet mixed separately for 24 h, dried overnight and afterward the CCTO powder was calcined at 900 ˚C for 12 h. Meanwhile the ZBS powders was melted at 1400 ˚C for 2 h. The ZBS glass was grinded to form a fine powder. Different weight percentages (wt%) of ZBS powder were added into CCTO (CCTO-ZBS), then the powders were wet mixed for 24 h. The CCTO-ZBS mixtures were dried, compacted at 300 MPa and then sintered at 1040 ˚C for 10 h. The addition of ZBS glass was desirable to increase the dielectric constants (33.99%) and reduce the dielectric loss (5.14%) of CCTO at the frequency range of 1 MHz–1 GHz.KeywordsCCTOGlass additionDielectric properties
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.