Effect of Zn-coating type on intergranular Cu-penetration in steels during weld-brazing

Abstract

Weld-brazing has emerged as a promising alternative to fusion welding for joining Zn-coated advanced high strength steels (AHSSs) due to its lower heat input, reduced Zn burn-off, and elimination of defects like porosity and blowholes. Additionally, the weld-brazing process minimizes HAZ softening, a phenomenon that can affect joint strength. While weld-brazing can potentially eliminate the liquid metal embrittlement (LME) caused by the penetration of molten Zn into grain boundaries (GBs), this study found that galvanized (GI) DP600 steels were more susceptible to intergranular penetration of Cu into the substrate during weld-brazing compared to galvannealed (GA) DP600. Although no Zn-related LME was observed during arc-brazing with Si-Bronze filler, the potential for Cu-related LME cracks to form in GI coated steels may affect the mechanical integrity of the joint.