Abstract
Ti-based composite coatings reinforced by in situ synthesized TiB and TiC were deposited on Ti6Al4V substrates by laser cladding. The effects of Y2O3 on the microstructure and cracking susceptibility of the coatings were investigated in details. It is shown that a small amount of Y2O3 addition can significantly refine the microstructure of the coatings by hastening spheroidization of the primary phase structure. The maximum refinement in microstructure was obtained with the optimum (2 wt%) addition of Y2O3. Moreover, it can increase the volume fraction of TiC and reduce the residual stress of the coatings due to the decrease in lattice distortion of the α(Ti) matrix. All of these factors lead to the reduction in cracking susceptibility of the coatings containing Y2O3 on the premise that the hardness of the coatings is improved. The fracture toughness of the coatings without and with Y2O3 (2 wt%) is 8.32 and 17.36 MPa·m1/2, respectively. Scanning electron microscope examination reveals a transition of the fractured surfaces from cleavage fracture to quasi-cleavage fracture resulting from the Y2O3 addition.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Wuhan University of Technology-Mater. Sci. Ed.
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
