Effect of wing plate structure on uplift resistance capacity of marine aquaculture anchor piles

Abstract

As the main component of the anchorage system in marine aquaculture facilities, the anchor pile is key to ensuring safety and stability. However, conventional monopiles have limited capacity to withstand uplift forces, thus rendering them susceptible to deviations and potentially causing damage to facility structures. Hence, a new winged monopile is proposed to improve and optimize the anchor pile. In this study, laboratory experiments are conducted to investigate the effect of load inclination angle (θ = 0°, 30°, 45°, and 60°), wing length (L = 30, 50, and 70 mm), and wing width (W = 10, and 20 mm) on the uplift resistance capacity of anchor piles in silty clay. The results show that: the winged monopile exhibits at least a 15% improvement in uplift performance compared with the conventional monopile (without wings) when the smallest wing plate parameters are selected (W = 10 mm, L = 30 mm). Additionally, the effect of the wing width on the uplift resistance under an oblique load is more evident than that of the wing plate length. As the area of the wing plate increases, the range of improved wing plate efficiency first increases, and then gradually decreases. This study can be used as a reference for the design optimization of uplift piles and the construction of marine aquaculture.