Abstract
Fabric sensory properties are complex concepts which include dimensional changes at small forces such as tensile, shear, compression and bending, surface properties (friction and roughness) plus surface coolness or warmness. The aim of this study was to investigating the effect of weft yarn twist level on sensorial comfort of 100% woven cotton fabrics. Five cotton fabrics were woven with incremental weft yarn twist levels and their tensile and shear strength, pure bending, compression, surface friction and roughness were evaluated using Kawabata Evaluation System and compared. The other sample parameters such as count, thread density and fabric structure were kept constant. Fabric water permeability and its wicking ability were also evaluated. The results showed that as the twist level increased, the fabric tensile, shear and bending properties also increased. This was observed in both the warp and weft direction. At higher level of twist, lower surface friction, less compressibility, less slipperiness (0.264 warp and 0.199 weft direction), rougher surface (0.026 warp and 0.020 weft) and less even surface (2.643 warp and 1.998) were observed. The wicking ability also reduced with the increase in twist level while there was an improvement in water permeability.
Highlights
Comfort is considered as a fundamental property when a textile product is evaluated
Effects of yarn count and the weave structure on handle properties have been investigated (Özgüney et al 2009) and the results showed that bending stiffness and compression of the fabrics produced with higher Tex are superior than that of the fabrics produced with lower Tex compact ring spun yarns
Five cotton fabrics were woven with incremental weft yarn twist levels and their tensile and shear strength, pure bending, compression, surface friction and roughness were evaluated using Kawabata Evaluation System (KES) and compared
Summary
Comfort is considered as a fundamental property when a textile product is evaluated. It is related to attributes like physiological comfort, for instance when a fabric is wet, its sensorial properties changes and fabric may cling to the skin giving a chilling effect. The capacity of a fabric to allow perspiration in its vapor or liquid form to pass through it is evaluated as its water permeability. This is Atalie et al Fash Text (2019) 6:3 significant for clothes intended for use in high intensity activities where people perspire excessively. If the fabric layers are not able to move moisture, sweat will be drenched between the skin and cloth This causes heat buildup causing discomfort, wet skin, and clothes adhesion to the skin causing chill effect
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.