Effect of water on the damage and energy dissipation feature of coal under uniaxial cyclic loading–unloading condition

Abstract

AbstractTo gain insight into the reduction mechanism of water on the dynamic destabilization failure character of coal under mining disturbance conditions, the effect of water on the damage and energy dissipation feature of coal was investigated via cyclic uniaxial compressive loading–unloading test, acoustic emission (AE) monitoring technology, and theoretical analysis. It manifests that the softening effect of water on the mechanical properties of coal is still remarkable, lower uniaxial compressive strength and elastic modulus, while greater axial strain and higher Poisson's ratio are observed under the cyclic loading–unloading condition. Water‐saturated specimens dissipate more energy during the cyclic loading–unloading process, which reduces the proportion of input energy accumulated in the coal mass, thus lowering the burst proneness of coal. A greater amount of damage generates in air‐dried specimens than that in water‐saturated specimens at the first cyclic loading–unloading cycle, while lower damage increments are observed in the following cycles. This may be the reason for the minimal energy dissipation of air‐dried specimens in the following cycles. The elastic modulus behaves logarithmically versus the increasing cyclic loading–unloading cycle counts. The energy dissipated due to the damage evolution and plastic deformation of coal specimens positively correlates with the energy released by AE activities, the AE energy in air‐dried specimens has a greater concentration around the peak axial stress and a stronger correlation with the dissipated energy. The cumulative AE energy and energy dissipation density are linearly correlated during the cyclic loading–unloading process, which indicates a possibility in estimating the damage evolution and the dynamic failure risk of coal via cumulative AE energy, under the cyclic loading–unloading condition.