Effect of water depth and insulation on the productivity of an acrylic pyramid solar still – An experimental study

Abstract

Evaporation and condensation rate directly depend on the surface area provided in the solar still. Considering that, pyramid solar still provides greater surface area than basin type still for condensation process and gives out high performance. In this research work, the pyramid solar still is researched by varying the water depth from 1 to 3.5 cm with and without insulation conditions. The performance of the pyramid solar still with insulation is greater than the without insulation. Insulation plays an important role to increase the yield by increasing the water temperature. The yield produced from the pyramid solar still was higher at the lowest water depth of 1 cm for both insulation and un-insulated condition. The freshwater production from the pyramid solar still without insulation is 3.27, 2.93, 2.26, and 1.59 kg/m2 and with insulation is 3.72, 3.40, 2.70, and 2.08 kg/m2 for the water depth of 1, 2, 3, and 3.5 cm, respectively. At 1 cm water depth, the pyramid solar still with and without insulation produced 19.46% and 8.26% higher yield than the single basin type solar still.The daily efficiency of solar still is improved to about 28.5% with insulation whereas, the daily efficiency for solar still without insulation is found as 26.17%.