Effect of waste oyster shell powder on the micro- and macroproperties and sustainable performance of cement-based materials

Abstract

A large amount of oyster shell waste is generated globally every year. Proper disposal of discarded oyster shells is crucial for reducing environmental pollution and achieving sustainable development. The aim of this paper was to study the feasibility of using waste oyster shells as a cementitious material to replace cement. The effects of waste oyster shell powder (OSP) with different water–binder ratios (w/b = 0.5, w/b = 0.2) and different substitution rates (10 %, 20 %) on the properties of cement-based materials were studied. The experimental results are as follows: The addition of oyster shell powder reduces the compressive strength, ultrasonic pulse velocity (UPV), surface electrical resistivity and cumulative heat of hydration of the mortar, but the strength loss is smaller for a water-to-binder ratio of 0.2 than for a water-to-binder ratio of 0.5. A good linear relationship between the compressive strength and UPV was also found. A good exponential relationship exists between the surface electrical resistivity and compressive strength. The heat of hydration results show that when the water–binder ratio is 0.5, replacing cement with waste OSP promotes aluminate phase hydration and advances the acceleration period. Finally, the carbon emissions of the mortar were normalized according to the compressive strength, and using OSP instead of cement at a low water–binder ratio was more conducive to reducing CO2 emissions.