Effect of vibration frequency and displacement on melt expulsion characteristics and geometric parameters for ultrasonic vibration-assisted laser drilling of steel

Abstract

Recently, the applications of ultrasonic vibration assistance to laser-based manufacturing processes are rapidly proliferating. Ultrasonic vibration-assisted laser drilling (UVLD) process involves simultaneous application of high frequency vertical vibrations to the workpiece while being irradiated with a continuous wave laser beam. In UVLD, the ultrasonic vibration assistance causes expulsion of droplets from the laser melted surface, resulting in the formation of deep holes. In this paper, systematic analysis of the effects of ultrasonic vibration frequency (20–40 kHz) and displacement (16–32 µm) on melt expulsion characteristics in early stages of drilling and geometric/quality features of the holes for UVLD of AISI 316 is presented. Based on the analysis of initiation of droplet ejection from the melt pool and particle size of the ejected droplets, mechanisms of droplet ejection based on capillary wave theory are proposed. It was observed that while increasing both ultrasonic vibration frequency and displacement resulted in reduction in droplet ejection initiation time and the formation of deeper holes for the given laser irradiation time (100 ms), the effect of vibration displacement was much more pronounced than the frequency on the variation.