Abstract
The flammability limits of methane and propane have been measured using cylindrical vessels of various sizes and one spherical vessel. An ac discharge ignition method has been employed. For a cylindrical vessel of small diameter with a large height, the flammability limits are primarily determined by the quenching effect of the wall. For cylindrical vessels of smaller heights, the experimental flammability limits are affected by hot gas accumulation at the vessel ceiling, unburnt gas heating, self heating of the incipient flame by the reflection both from walls and ceiling, and the quenching effect of the walls. If the vessel size is large enough so that all these effects become negligible, the experimental values of flammability limits may approach to the values that would be obtained in free space. In order to approach this condition for a cylindrical vessel, it is desirable to use a container at least 30 cm in diameter and 60 cm in height. For comparison purpose, the measurement has also been done using ASHRAE type 12 l spherical flask.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.