Effect of vertical morphology on the performance of silole-containing low-bandgap inverted polymer solar cells

Abstract

The vertical distribution of blended components in the active layer of a bulk heterojunction solar cell composed of poly[(4,4′-bis(2-ethylhexyl)dithieno[3,2-b:2′,3′-d]silole)-2,6-diyl-alt-(2,1,3-benzothiadiazole)-4,7-diyl] (PDTS-BTD) and [6,6]-phenyl-C71 butyric acid methyl ester (PC 71BM) was studied using X-ray photoemission spectroscopy (XPS) and Auger electron spectroscopy (AES) depth profile. We found that the vertical profile of the PDTS-BTD:PC 71BM thin films varies, with a PC 71BM rich region near the bottom surface and a polymer rich on the top surface. This suggests that the inverted device geometry may be superior to the conventional device geometry for the fabrication of efficient polymer solar cells. Significant enhancement in the power conversion efficiency (PCE) of an inverted polymer solar cell was observed compared to the conventional cell. The enhancement in device performance is attributed to the efficient charge extraction due to the exploitation of vertical morphology of the active layer using the inverted device geometry.