Effect of variable viscosity, porous walls and mixed thermal boundary condition on the onset of Rayleigh-Bénard convective instability

Abstract

In this paper, we have studied the criteria for the onset of instability in the Rayleigh-Bénard convection problem, by considering a fluid layer confined between two infinitely extended rough boundaries, which are subjected to mixed-type thermal boundary conditions, physically representing the imperfectly conducting boundaries. The rough boundaries are assumed to be shallow porous layers with different pore size, properties, and permeabilities. Mathematically, it is given by the Saffman type boundary condition. Therefore, we have two generalized forms of boundary conditions, one for the flow field and the other for the thermal field. The two limiting cases of the mixed-type thermal boundary condition correspond to a perfectly conducting boundary and to a perfectly insulating boundary, whereas the two limiting cases of the hydrodynamic boundary condition correspond to a no-slip condition and to a free-surface condition, depending upon the limiting values of the parameters involved in these two generalized boundary conditions. The linear and nonlinear energy stability analyses are performed, and the existence of the region of subcritical instability is checked. Through the principle of exchange of stability analysis, it is found that the instability occurs only in the stationary mode. The adiabatic boundary condition is found to be more restrictive than the isothermal boundary condition. Under given conditions, the instability is observed to be occurring in the infinite wavelength mode for the case of adiabatic boundaries. In the present work, the effect of temperature and pressure dependent viscosity on the stability of the system has been shown and found to be of destabilizing nature. However, the roughness of the boundaries is found to be of stabilizing nature.